Help

This error message can occur if either of the following conditions exists:

• Your computer has hardware or software problems (hardware failure is the most common cause).
  
• You try to over clock the speed of your computer's processor (for example, you set a 150 MhZ processor to run at 187 MhZ).
  

The above STOP error means a trap occurred in kernel mode and the trap is either one the kernel is not allowed to have or is always fatal. The most common causes of a STOP 0x7F are:

• Low-level hardware corruption, such as corrupt memory (RAM)
  
• Mismatched memory modules
  
• A malfunctioning motherboard
  

Pulled from Microsoft website.